Cangzhou Shengtai Pipeline Co.,Ltd

Add: Hi-tech Industrial Development Zone, Cangzhou City, Hebei Province, China.

Tel: +86-317-3777977, +86-317-377787

E-mail: sara@heb315.com ; anny@heb315.com ; david@heb315.com ;sales@heb315.com

Fax: +86-317-3777877

Press Fitting System

press fitting system 1.Product category of the press fitting system. Elbow, bend, tee, reducer, coupling, cap, flange etc. 2.Product specification of the press fitting system. Specification: DN10-DN100. Thickness: 1.0-2.0mm. 3.Product standard & material of the press fitting system. Standard...

1.Category of the press fitting system.

Elbow, bend, tee, reducer, coupling, cap, flange etc.

 

2.Specification  

Specification: DN10-DN100.

Thickness: 1.0-2.0mm.

 

3.Standard & material of the press fitting system.

Standard: (DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1,GB/T19228.3-2011 etc.

Material: 304, 304L,316, 316L etc.

 

4.Sealing material standard & material  

Standard: GBT 19228.3-2003, EN681-1:1998 etc.

Material: HNBR,PTFE, CIIR,EPDM,FKM etc.

 

5.Working temperature  

-20°C to 130°C.

 

6.Max working pressure 

1.6MPa (equal to 232 psi).

 

7. Installation steps  

1)Cut the pipe

Cut the pipe with the cutter, then use special burr removal device or file to remove the burrs completely in case of puncturing the sealing ring.

2)Draw a line

Draw a line with a scriber at bottom of the pipe to confirm the insert length to avoid pipe dropping.

3)Insert the pipe

Insert the pipe to pipe fitting straightly, do not puncture the rubber ring, and confirm the length within 3mm between bottom and the line you drawn.

4)Compress

Make ringlike concave of jaw alignment ringlike convex of pipe fitting ending with rubber ring, and then make compress.

5)Confirm the size

Confirm the size with a hexagon gauge, to ensure the compression position can insert the hexagon gauge completely, avoid irregular compress operation.

1副本.jpg

Hot Tags: press fitting system, China, manufacturers, factory, price
Inquiry